Skip to content

Slot: port

_This value is only needed to be specified for called nodes (e.g. those that respond to a TCP.Open request). _

_ _

_This value specifies the TCP port to be used. Well known and "registered" ports are preferred and can be found at: _

_ http://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xhtml _

_ _

_For IEC 60870-6 TASE.2 (e.g. ICCP) and IEC 61850, the value used shall be 102 for non-TLS protected exchanges. The value shall be 3782 for TLS transported ICCP and 61850 exchanges. _

_ _

_ _

__

URI: cim:TCPAccessPoint.port

Applicable Classes

Name Description Modifies Slot
TCPAccessPoint Allows addressing and behavioural information regarding the use of TCP by ICC... no
ISOUpperLayer Is a set of configure addressing information that is required since ICCP util... no

Properties

Identifier and Mapping Information

Schema Source

  • from schema: https://cim.ucaiug.io/ns#TC57CIM

LinkML Source

name: port
description: "This value is only needed to be specified for called nodes (e.g. those\
  \ that respond to a TCP.Open request).\r\n\r\nThis value specifies the TCP port\
  \ to be used. Well known and \"registered\" ports are preferred and can be found\
  \ at:\r\n http://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xhtml\r\
  \n\r\nFor IEC 60870-6 TASE.2 (e.g. ICCP) and IEC 61850, the value used shall be\
  \ 102 for non-TLS protected exchanges. The value shall be 3782 for TLS transported\
  \ ICCP and 61850 exchanges.\r\n\r\n\r\n"
from_schema: https://cim.ucaiug.io/ns#TC57CIM
rank: 1000
slot_uri: cim:TCPAccessPoint.port
multivalued: false
alias: port
owner: TCPAccessPoint
domain_of:
- TCPAccessPoint
range: integer
required: false