Class: ACDCConverterDCTerminal

name: ACDCConverterDCTerminal
description: A DC electrical connection point at the AC/DC converter. The AC/DC converter
  is electrically connected also to the AC side. The AC connection is inherited from
  the AC conducting equipment in the same way as any other AC equipment. The AC/DC
  converter DC terminal is separate from generic DC terminal to restrict the connection
  with the AC side to AC/DC converter and so that no other DC conducting equipment
  can be connected to the AC side.
from_schema: https://cim.ucaiug.io/ns#TC57CIM
rank: 1000
is_a: DCBaseTerminal
attributes:
  polarity:
    name: polarity
    description: "Represents the normal network polarity condition. Depending on the\
      \ converter configuration the value shall be set as follows:\r\n- For a monopole\
      \ with two converter terminals use DCPolarityKind “positive” and “negative”.\r\
      \n- For a bi-pole or symmetric monopole with three converter terminals use DCPolarityKind\
      \ “positive”, “middle” and “negative”."
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:ACDCConverterDCTerminal.polarity
    multivalued: false
    domain_of:
    - ACDCConverterDCTerminal
    range: DCPolarityKind
    required: false
  dcconducting_equipment:
    name: dcconducting_equipment
    description: A DC converter terminal belong to an DC converter.
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    slot_uri: cim:ACDCConverterDCTerminal.DCConductingEquipment
    multivalued: false
    domain_of:
    - ProtectiveActionAdjustment
    - DCTerminal
    - ACDCConverterDCTerminal
    range: ACDCConverter
    required: true
class_uri: cim:ACDCConverterDCTerminal

name: ACDCConverterDCTerminal
description: A DC electrical connection point at the AC/DC converter. The AC/DC converter
  is electrically connected also to the AC side. The AC connection is inherited from
  the AC conducting equipment in the same way as any other AC equipment. The AC/DC
  converter DC terminal is separate from generic DC terminal to restrict the connection
  with the AC side to AC/DC converter and so that no other DC conducting equipment
  can be connected to the AC side.
from_schema: https://cim.ucaiug.io/ns#TC57CIM
rank: 1000
is_a: DCBaseTerminal
attributes:
  polarity:
    name: polarity
    description: "Represents the normal network polarity condition. Depending on the\
      \ converter configuration the value shall be set as follows:\r\n- For a monopole\
      \ with two converter terminals use DCPolarityKind “positive” and “negative”.\r\
      \n- For a bi-pole or symmetric monopole with three converter terminals use DCPolarityKind\
      \ “positive”, “middle” and “negative”."
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:ACDCConverterDCTerminal.polarity
    multivalued: false
    alias: polarity
    owner: ACDCConverterDCTerminal
    domain_of:
    - ACDCConverterDCTerminal
    range: DCPolarityKind
    required: false
  dcconducting_equipment:
    name: dcconducting_equipment
    description: A DC converter terminal belong to an DC converter.
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    slot_uri: cim:ACDCConverterDCTerminal.DCConductingEquipment
    multivalued: false
    alias: dcconducting_equipment
    owner: ACDCConverterDCTerminal
    domain_of:
    - ProtectiveActionAdjustment
    - DCTerminal
    - ACDCConverterDCTerminal
    range: ACDCConverter
    required: true
  dctopological_node:
    name: dctopological_node
    description: See association end Terminal.TopologicalNode.
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    slot_uri: cim:DCBaseTerminal.DCTopologicalNode
    multivalued: false
    alias: dctopological_node
    owner: ACDCConverterDCTerminal
    domain_of:
    - DCEquipmentContainer
    - DCNode
    - DCBaseTerminal
    range: DCTopologicalNode
    required: false
  dcnode:
    name: dcnode
    description: The DC connectivity node to which this DC base terminal connects
      with zero impedance.
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:DCBaseTerminal.DCNode
    multivalued: false
    alias: dcnode
    owner: ACDCConverterDCTerminal
    domain_of:
    - DCBaseTerminal
    range: DCNode
    required: false
  connected:
    name: connected
    description: "The connected status is related to a bus-branch model and the topological\
      \ node to terminal relation.  True implies the terminal is connected to the\
      \ related topological node and false implies it is not. \r\nIn a bus-branch\
      \ model, the connected status is used to tell if equipment is disconnected without\
      \ having to change the connectivity described by the topological node to terminal\
      \ relation. A valid case is that conducting equipment can be connected in one\
      \ end and open in the other. In particular for an AC line segment, where the\
      \ reactive line charging can be significant, this is a relevant case.\r\n"
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:ACDCTerminal.connected
    multivalued: false
    alias: connected
    owner: ACDCConverterDCTerminal
    domain_of:
    - ACDCTerminal
    range: boolean
    required: false
  sequence_number:
    name: sequence_number
    description: "The orientation of the terminal connections for a multiple terminal\
      \ conducting equipment.  The sequence numbering starts with 1 and additional\
      \ terminals should follow in increasing order.   The first terminal is the \"\
      starting point\" for a two terminal branch.\r\n"
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    slot_uri: cim:ACDCTerminal.sequenceNumber
    multivalued: false
    alias: sequence_number
    owner: ACDCConverterDCTerminal
    domain_of:
    - ModelOperationArg
    - ModelOperation
    - DiagramObjectPoint
    - ACDCTerminal
    - WorkFlowStep
    - SwitchingStep
    - SwitchingStepGroup
    - FieldDispatchStep
    - UserAttribute
    - Procedure
    - TimeTariffInterval
    - ConsumptionTariffInterval
    - WirePosition
    - ACLineSegmentPhase
    - RegularTimePoint
    - TimePoint
    - PositionPoint
    - WireSegmentPhase
    - ProfileData
    range: integer
    required: false
  bus_name_marker:
    name: bus_name_marker
    description: The bus name marker used to name the bus (topological node).
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    slot_uri: cim:ACDCTerminal.BusNameMarker
    multivalued: false
    alias: bus_name_marker
    owner: ACDCConverterDCTerminal
    domain_of:
    - ReportingGroup
    - ACDCTerminal
    - TopologicalNode
    range: BusNameMarker
    required: false
  operational_limit_set:
    name: operational_limit_set
    description: The operational limit sets at the terminal.
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:ACDCTerminal.OperationalLimitSet
    multivalued: true
    alias: operational_limit_set
    owner: ACDCConverterDCTerminal
    domain_of:
    - ACDCTerminal
    - OperationalLimit
    - Equipment
    range: OperationalLimitSet
    required: false
  measurements:
    name: measurements
    description: Measurements associated with this terminal defining  where the measurement
      is placed in the network topology.  It may be used, for instance, to capture
      the sensor position, such as a voltage transformer (PT) at a busbar or a current
      transformer (CT) at the bar between a breaker and an isolator.
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    slot_uri: cim:ACDCTerminal.Measurements
    multivalued: true
    alias: measurements
    owner: ACDCConverterDCTerminal
    domain_of:
    - PowerSystemResource
    - ACDCTerminal
    - Asset
    - Location
    - Procedure
    - AnalogLimitSet
    - AccumulatorLimitSet
    range: Measurement
    required: false
  alias_name:
    name: alias_name
    description: "The aliasName is free text human readable name of the object alternative\
      \ to IdentifiedObject.name. It may be non unique and may not correlate to a\
      \ naming hierarchy.\r\nThe attribute aliasName is retained because of backwards\
      \ compatibility between CIM relases. It is however recommended to replace aliasName\
      \ with the Name class as aliasName is planned for retirement at a future time.\r\
      \n\r\n"
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:IdentifiedObject.aliasName
    multivalued: false
    alias: alias_name
    owner: ACDCConverterDCTerminal
    domain_of:
    - IdentifiedObject
    range: string
    required: false
  description:
    name: description
    description: The description is a free human readable text describing or naming
      the object. It may be non unique and may not correlate to a naming hierarchy.
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:IdentifiedObject.description
    multivalued: false
    alias: description
    owner: ACDCConverterDCTerminal
    domain_of:
    - IdentifiedObject
    - NameType
    - NameTypeAuthority
    - DataSet
    - SwitchingStepGroup
    - AreaReserveSpec
    range: string
    required: false
  m_rid:
    name: m_rid
    description: "Master resource identifier issued by a model authority. The mRID\
      \ is unique within an exchange context. Global uniqueness is easily achieved\
      \ by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is\
      \ strongly recommended.\r\nFor CIMXML data files in RDF syntax conforming to\
      \ IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify\
      \ CIM object elements."
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:IdentifiedObject.mRID
    multivalued: false
    alias: m_rid
    owner: ACDCConverterDCTerminal
    domain_of:
    - IdentifiedObject
    - DataSet
    range: string
    required: false
  diagram_objects:
    name: diagram_objects
    description: The diagram objects that are associated with the domain object.
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:IdentifiedObject.DiagramObjects
    multivalued: true
    alias: diagram_objects
    owner: ACDCConverterDCTerminal
    domain_of:
    - IdentifiedObject
    range: DiagramObject
    required: false
  instance_set:
    name: instance_set
    description: Dataset containing the data objects.
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:IdentifiedObject.InstanceSet
    multivalued: false
    alias: instance_set
    owner: ACDCConverterDCTerminal
    domain_of:
    - IdentifiedObject
    range: InstanceSet
    required: true
  names:
    name: names
    description: All names of this identified object.
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:IdentifiedObject.Names
    multivalued: true
    alias: names
    owner: ACDCConverterDCTerminal
    domain_of:
    - IdentifiedObject
    - NameType
    range: Name
    required: false
  properties_cimdata_object:
    name: properties_cimdata_object
    description: The single CIM data object in the appropriate dataset context.
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:IdentifiedObject.PropertiesCIMDataObject
    multivalued: false
    alias: properties_cimdata_object
    owner: ACDCConverterDCTerminal
    domain_of:
    - IdentifiedObject
    range: ChangeSetMember
    required: false
  targeting_cimdata_object:
    name: targeting_cimdata_object
    description: Data objects registered.
    from_schema: https://cim.ucaiug.io/ns#TC57CIM
    rank: 1000
    slot_uri: cim:IdentifiedObject.TargetingCIMDataObject
    multivalued: true
    alias: targeting_cimdata_object
    owner: ACDCConverterDCTerminal
    domain_of:
    - IdentifiedObject
    range: ChangeSetMember
    required: false
class_uri: cim:ACDCConverterDCTerminal